Science Quiz / MSE Vocab (part 2)

Random Science or Definition Quiz

Can you name the MSE Vocab (part 2)?

Quiz not verified by Sporcle

Challenge
Share
Tweet
Embed
Score 0/46 Timer 10:00
DefinitionTerm
Average force divided by the original cross-sectional area.
A phase transformation in which all the liquid phase transforms on cooling into tow solid phases isothermally.
The temperature during solidification of an alloy at which the last of the liquid phase solidifies.
The elastic modulus of a material divided by its density.
Materials consisting of long molecular chains or networks of low-weight elements such as carbon, hydrogen, oxygen, and nitrogen.
The ease of forming martensite in a steel upon quenching from the austenitic condition.
Materials which are a mixture of two or more materials.
A localized decrease in the cross-section of a tensile specimen.
Equilibrium phase transformations involving zero degrees of freedom.
Substances of which something is composed or made.
A mixture of ferrite and small particles of Fe3C produced by the decomposition of austenite.
The stress at which a specific amount of strain (0.2%) occurs in the engineering tensile test.
The tensile strength of a material divided by its density.
Materials which are characterized by high thermal and electrical conductivity.
A system where no macroscopic changes take place with time.
Materials consisting of compounds of metals and nonmetals which are usually hard and brittle.
The temperature at which a eutectic reaction takes place.
The critical value of the stress-intensity factor
The condition of stress on a composite material which causes uniform strain on all the composite layers.
One which is to the right of the eutectic point.
The maximum stress in the engineering stress-strain diagram.
An interstitial solid solution of carbon in FCC iron.
A test in which a 1 in diameter bar by 4 in long is austenitized and then water quenched at one end.
DefinitionTerm
A discipline, which is primarily concerned with the search for basic knowledge about the internal structure, properties, and processing of materials.
Materials used in electronics, especially microelectronics.
The temperature at which liquid starts to solidify under equilibrium conditions.
A mode of fracture characterized by rapid crack propagation.
Stress divided by strain in the elastic region of an engineering stress-strain diagram.
A mixture of ferrite and cementite phases in parallel plates produced by the euctectoid decomposition of austenite.
The change in length of sample divided by the original length of the sample.
The point determined by the eutectic composition and temperature.
A physically homogeneous and distinct portion of a material system.
A supersaturated interstitial solid solution of carbon in body-centered tetragonal iron.
Metals and alloys which contain a large percentage of iron such as steels and cast irons.
A steel with 0.8% C.
A material deformed by a force returns to its original dimensions after the force is removed.
The condition of stress on a composite material which causes uniform stress on all the composite layers.
A measure of the amount of energy a material can absorb before fracture.
The composition of the liquid phase that reacts to form two new solid phases at the eutectic temperature.
A discipline which is primarily concerned with use of fundamental and applied knowledge of materials so that they can be converted into products needed or desired by society.
A material deformed by a force has changed its shape after the force is removed.
Metals and alloys which do not contain iron or if they do contain iron, it is only in a relatively small percentage.
A mode of fracture characterized by slow crack propagation.
One which is to the left of the eutectic point.
An interstitial solid solution of carbon in BCC iron.
The intermetallic compound Fe3C, a hard and brittle substance.

You're not logged in!

Compare scores with friends on all Sporcle quizzes.
Sign Up with Email
OR
Log In

You Might Also Like...

Show Comments

Extras

Top Quizzes Today


Score Distribution

Your Account Isn't Verified!

In order to create a playlist on Sporcle, you need to verify the email address you used during registration. Go to your Sporcle Settings to finish the process.